Cpv Code 42716110-2 Devices Such As A Barrier To The Partition In The Partition Wall. Internal Pit Is Divided Into Two Chambers-Pullmanautomatic Type Positioning Of The Drum For Loading And Unloading. Loping Doors Opened At An Angle Of At Least 170 Degrees. Standing Drum Perforation (For The Savings Of The Laundry Fibers). Drum For Greater Effectiveness Of Washing And Less Water Consumption. Mechanism Of Safe Locking Of The Interior And External Doors. Drive Misery Drum Controlled By Inverter. Automatic Vortex Management System. Internal And External Stainless Stainless Steel. Module 1: 10. Dimlage Dimlage A Minimum Of 900 Mm For Good Washing Mechanical Action And Lower Wear Of The Washing Detergents. Sharing Min. 900 Rpm. Set Of Centrifugation Minimum 400G. Moc Maximum Electric Heating 42 Kw. Loading Capacity: Min 850 Mm For The Possibility Of Introducing Trolleys With A Height Of Max 85 Cm Under The Batch Door. Machines Wire Of Not More Than 140 Cm (Due To The Limited Installation Space). Machine Up To 175 Cm. Maxal Depth Of Transport Machine Max. 110 Cm (To Be Able To Introduce The Machine Through The Door). Solar Heavy Construction - Net Weight Min 1,400 Kg. The Trigger Plate Made Of Stainless Steel (Without Rubber Membranes) Controlled By Water Pressure (Not Electromagnetic). A Fully Programmable Controller With Lcd Display (Menu In Polish). The System Automatically Adapting Water Consumption And Detergents To Incomplete Loads Without The Need For Manually Administration Of Weight. Using To Connect The Automatic Fluid Dosing Station, Along With The Electronic Record Of The Consumption Of The Agents And Cycles Of The Laundry. Automatic Detergent Dosing System. Possibility Of Cooperation With Network Software For Laundry Management. Faller Powered By Three Types Of Water: Cold Water Supply (Hard) Water, Hot Water, Soft Water. 2) The Range Of Necessary Work: Cpv Code 45300000-0Demone Washing-Wage. Decoction (Adaptation) Of The Concrete Pedestal Under The New Laundry-Wage. Report Of The New Laundry-Wage.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
