Quotation are invited for Safety : Electric Air Pump High Volume Delivery Date: 2025/06/27 Delivery To: F Munnik MILNERTON FIRE STATION Delivery Address: 1 MILNERTON FIRE STATION, KOEBERG ROAD - MILNERTON Closing Date: 2025/04/24 Closing Time: 03:00 PM Description: 10 each x electric air pump high volume Specification: * REFER TO: GA12500559 ELECTRIC HIGH VOLUME AIR PUMP High volume 220 volt electric air pump / inflator. # Fitted with 220 / 230V main motor and supplementary booster motor, capable of running simultaneously or main only. # Both motors protected by thermal-amperic fuses and overload protection. # Reversible flow to inflate and deflate. # Rugged durable one-piece casing with waterproof switch. # CE approved. # Cord Length: no less than 180 cm; fitted with SA suitable 2 or 3 pronged plug. # Pressure Output: minimum 140 to 400 mbar. # Flow Rate: 1200 to 2000 L/min at 2000 watts power output. # Weight: maximum 5.2 kg # Approximate dimensions of pump: o Length 32 cm o Width 17 cm o Height 26 cm # Heavy duty EDPM hose included, of minimum length 140cm; along with one inflation adapter needed for most sealed air products and one hose adaptor for use with any HR style inflation valve. # Carry strap to be included. # Colour: Green or Grey M J Kelder 0214001523 QUOTATION CONDITIONS: CLAUSE - 2.14.1 & 2.15 Provide, on request by the CCT, any other material that has a bearing on the quotation offer, the suppliers commercial position (including joint venture agreements), preferencing arrangements, or samples of materials, considered necessary by the CCT for the purpose of the evaluation of the quotation. If the Specifications require the supplier to provide samples/technical data sheets, these shall be provided strictly in accordance with the instructions set out in the Specification. If such samples /technical data sheets are not submitted as required in the bid documents or within any further time stipulated by the CCT in writing, then the bid concerned may be declared non-responsive. ,,Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words or equivalent ,,NB: The Municipal Bidding Document 6.1 (MBD 6.1) is attached, in order to be eligible for preference points bidders are required to submit a duly completed, current dated MBD 6.1 document with supporting documents with each and every RFQ submission, failure to submit will result in zero point allocation. NB PLEASE SUBMIT SAMPLE PICURE AND SPECIFICATION SHEET WITH YOUR RFQ SUBMISSION, IF NOT RECEIVED YOU MAY BE DEEMED NON COMPLIANT Proof of Insurances: Bidders must either attach proof of the following insurances required in terms of the General and Special Conditions of Contract to this schedule or submit an Insurance Brokers Warranty (see attaced pro-forma on following page) attesting to their compliance herewith: 1.,,Public Liability Insurance for this contract is R 20 000 000 2.,,Motor Vehicle Insurance 3.,,Registration or insurance in terms of the Compensation for Occupational Injuries and Diseases Act, Act 130 of 1993. Failure to submit proof of all the above, either with this quotation or within any further time for submission stated in a written request from the CCT, will result in the Bidders quotation being declared as non-responsive. Tender Link : http://web1.capetown.gov.za/web1/ProcurementPortal/RFQ/Details/303807
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
