Bids Are Invited For Price Registration For Future And Eventual Acquisitions Of Office Supplies And School Sets Fnde To Meet The Demands Of All Municipal Secretariats
Bids Are Invited For Price Registration For Future And Eventual Acquisitions Of Office Supplies And School Sets Fnde To Meet The Demands Of All Municipal Secretariats
School Set Model Fnde Cja 04 From 06 To 09 Years. Mdp Wood Top (Mdp), With Rounded Corners, 15Mm Thickness With Upper High Pressure Melamine Laminate Coatings With Gray Textured Finish, Posted To The Structure With Ø X 45Mm Ø X 45Mm Screws. Polypropylene Books Door, Posted To 4, 0 Mm X 10 Mm Long In Length And International Recycling Symbol. Polypropylene Tips And Shoes Virgin Copolymer Affixed By Fitting. Longitudinal Column And Dish In Oblong Tube 29 X 58 Mm (Ch 16), Upper Tube Dish Ø 1 ¼ ”(Ch 16) And Feet Made Of Tube Ø 1 ½” (Ch 16). Approximate Dimensions: Cja-04 (L X P X A) 600 X 450 X 644 Mm. Chair: Polypropylene Seat And Backrest Posted To The Structure Of Disgusting Rivets. In Virgin Copolipylene Polypropylene, With The International Recycling Symbol And Posted By Fitting. Tubular Structure Ø 20, 7 Mm (Ch 14). Approximate Dimensions: Cja-04 Backrest 396 X 198 400 X 350 Seat Height To 380 Mm Seat. Observations: Set Indicated For Elementary School. Recommended For Children 1, 33 To 1, 59 M In Height. With Inmetro Seal, School Set Fnde Cja 06 Adult Agglometed Wood (Mdp), 15Mm Thickness With High Pressure Melamine Laminate Coatings With Gray Gray Textured Finish, Tube Top Ø 1 ¼ ”(Ch 16) And Feet Made Of Tube Ø 1 ½” (Ch 16). 600 X 450 X 760 Mm; Chair: Polypropylene Seat And Backrest Posted To The Structure Of Disgusting Rivets. In Virgin Copolipylene Polypropylene, 7 Mm (Ch 14). Approximate Dimensions: Cja-06: Backrest 396 X 198Asento 400 X 430 Height To 460 Mm Seat; Observations: Set Indicated For Elementary/High School. Recommended Students From 1, 59 To 1, 88 M High. With Inmetro Seal, Black Swivel Chair, With The Following Minimal Characteristics: Reloming High Fixed: Zipper -Closing Polyester Flexible Screen, Excellent Tenacity Material And Optimal Mechanical Resistance. Structure Of The Backrest Made Of Round Tubular Steel, Curved Pneumatically And Interconnected To A Transverse Steel Plate At The Bottom With A Minimum Thickness Of 6Mm Soldiers By The Mig System, And Anatomically Molded With Excellent Resistance. The Disgust Should Be Interconnected To The Mechanism Through A Stamped Steel Plate With A Reinforcement Structure That Gives High Mechanical Resistance, Not Being Fixed The Backrest In The Seat, But To The Chair Adjustments Command. Director Seat: Internal Chassis Manufactured By Polyamide Engineering Resin Injection Process (Nylon 6), With Fiberglass; Seat Sliding System Coupled To The Seat Via Tubular Tubular Tubular Tubes With Built -In Side Drive For Release And Locking Through Springs With A Minimum Course Of 50Mm. Upholstered With Flexible Polyurethane Foam Injected Cfc, High Resilience, High Resistance To Tear Propagation, High Stretching And Rupture Voltage, Low Dynamic Fatigue And Low Permanent Density With Density Between 52Kg/M3, According To Nbr 8537/15, Nbr 8619/15, Nbr 8797/15 And Anatomically Molded With Thickness Average Of 50Mm. Minimum Depth Of 470Mm And Minimum Width Of 490Mm. Mechanism: Made With Patterned Steel Plate, Every Set Painted With Epoxy Powder Paint, Mechanism
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
