Quotation Are Invited For Supply Of Wooden Boxes Including Industrial Packing With Gas Packing Of D Ph2 Brp Motor Stator Coil And Accessories

Quotation are invited for Supply of Wooden Boxes including Industrial Packing with Gas Packing of D Ph2 BRP Motor Stator Coil and Accessories. SCOPE OF WORKPR # 1032501471SUPPLY OF WOODEN BOXES, INCLUDING INDUSTRIAL PACKING WITH GAS PACKING OFD PH2 BRP MOTOR STATOR COIL AND ACCESSORIESINTRODUCTION:WE HAVE PRODUCED WINDING COILS FOR D-PH-2 BRP MOTOR, AS AN INSURANCESPARE AND TO REDUCE REWINDING TIME IN BR P MOTORS. THESE COILS WILL BEINSPECTED AND WILL BE STORED IN COVERED SHADE FOR FUTURE USE.THIS ENQUIRY IS RAISED TO CALL SPECIALIZED PARTIES IN THE PACKINGINDUSTRY TO RE-PACK THE MOTOR REWINDING MATERIALS, FOR LONG TERMSTORAGE.SCOPE OF SUPPLY AND JOB:A)#GAS PACKIN G OF MOTOR WINDING COILS & OTHER WINDING ACCESSORIESREQUIRE TWO BOXES OF 1770 X 1370 X 1170 MM & 1270 X 870 X 810 MM. (L X WX H)B)#M ANUFACTURE OF ENCLOSURES MADE TO MEASURE FOR THE GOODS TO BEPROTECTED AGAINST CORROSION, DUST, SAND, UV, OZONE.C)#PACKING ALUMINUM L AMINATE SHOULD COMPLIES WITH FRENCH STANDARDS NF H00-310 AND US MIL PRF 131J.D)#PACKING MUST PROVIDE PROTECTION OF THE SALIENT PARTS TO AVOID ANYPUNCTURE OF THE BAG WITH FOAM AND / OR PAD FOAMS.E)#ENOUGH DESICCANT (SILICA GEL) WILL BE ADDED TO THE PACKED EQUIPMENT IN ACCORDANCE WITH STANDARDS OF PACKING AND PACKAGING (SEI) TO ENSURETHAT THE RELATIVE AIR HUMIDITY LOCATED INSIDE THE SEALED ENCLOS URE ISMAINTAINED AT LESS THAN 50% DURING THE ENTIRE TRANSPORT AND STORAGEPERIOD.F)#DESICCANT USED MUST COMPLY WITH STANDARDS NF H 00 -320, NF H 00-321OR DIN 55473 OR US MIL D 3464 OR EQUIVALENT STANDARD.G)#MOISTURE ABSORBING MATERIALS WILL BE PLACED IN SUCH A WAY T HEY NEVERCONTACT THE EQUIPMENT.H)#PROTECTIVE PACKING MUST BE SUITABLE FOR LONGER STORAGE DURATION,E.G. MORE THAN (5) FIVE YEARS.I)#E LECTRONIC RELATIVE HUMIDITY INDICATOR (0 TO 100%) WITH TEMPERATUREINDICATOR (0 TO 100 DEGREES CELSIUS SHALL BE PROVIDED AND INSTALLE D INEACH BOX. BATTERY LIFE OF THE HUMIDITY INDICATOR SHALL BE GIVEN FORREGULAR REPLACEMENT.J)#PACKAGING WILL BE FILLED WITH INERT AN D NEUTRAL GAS (NITROGEN) INACCORDANCE WITH STANDARDS OF PACKING AND PACKAGING. OXYGEN % RATE < OR =14%; RELATIVE HUMIDITY % RATE < O R = 40 %.CRATING AND PACKING:A)#TYPE AND CONSTRUCTION: MANUFACTURING THE NECESSARY BOXES FOR THEGOODS TO BE PACKED.B)#WOODEN BOXES M ADE OF COMMERCIAL MARINE PLYWOOD THAT COMPLY WITHSTANDARDS NF B 52-001, GRADE CDX12MM, FRAMED WITH WHITE WOOD 10X2.5CM.C)#BASE MADE WITH REINFORCED WOODEN STRUCTURE WITH WOODEN BEAMS10X10CM, MOUNTED ON SKIDS 10X12CMD)#RAISING WEDGES OF AT LEAST 10 MM WILL BE PLACE D ON THE EDGES OF THERUNNERS# SKIDS TO RAISE ALL THE SIDE PANELS TO AVOID ANY RISK OF TEARINGDURING HANDLING AND LIFTING OF THE BODY OF THE PACKAGE.E)#ALL MATERIALS USED IN THE CONSTRUCTION OF CASES/CRATES/WOODEN BASESWILL BE NEW AND UNUSED, WITHOUT EVIDENCE OF RO T, BARK, GRAZES OR SPLITS,AND WILL HAVE SUFFICIENT STRENGTH FOR ITS INTENDED USE.F)#MECHANICAL PROTECTION: THE GOODS WILL BE PLACED ON THE WOODEN BASEAND COMPLETELY IMMOBILIZED AND MADE INTERDEPENDENT WITH THE PACKAGEBEING SUPPORTED BY SUITABLE WEDGING AND WOODEN BLOCKING SYSTEMS TOPREVENT MOVEMENT OF EQUIPMENT IN ANY DIRECTION.ABRASION AND VIBRATION PROTECTIONS:A)#ALL SHARPEN PARTS AND CRITICAL ITEMS LIKE PRESSURE SWITCH, VALVE,PRESSURE REGULATOR AND PRESSURE GAUGE WILL BE WOUNDED WITH WHITEFLEXIBLE FOAM 3MM TO REDUCE VIB RATION AND SHOCKS.B)#EACH EQUIPMENT SHOULD BE WOUND WITH A FLEXIBLE FOAM 3MM, TO REDUCEVIBRATION AND SHOCKS.C)#FLEXIBLE FOAM AND / O R FOAM PADS (NON-HYDROSCOPIC MATERIAL) WILL BEPLACED BETWEEN ANY INTERNAL WOODEN PART TO AVOID DIRECT CONTACT WITH THEEQUIPMENT.IMPE RMEABILITY OF PACKAGES TO RUNOFF WATER:A)#WATERPROOF TARPAULIN LINED ON THE INSIDE AND PLACED ABOVE ALL THEPANELS TO PREVENT WATER P ENETRATION.B)#VENTILATION: AT LEAST 2 VENTILATIONS SYSTEMS OF 20CM2 EACH LINEDWITH METAL MESH, ONE ON THE TOP AND THE OTHER ON THE B OTTOM OF THE BOXWILL BE PLACED ON 2 OPPOSITE SIDES, PER SECTION OF 10M3.CLOSING OF THE PACKAGEA) Qty: 1 Supply of wooden boxes,including industrial packing with Gas packing of D Ph2 BRP motor stator coil and accessories. Scope of work is attached. Enquiry may be sent to the following vendor alongwith suitable vendors. IPAC Valsem Industrial Packing Phone:+97126321107/0561984222 STANDARD TERMS & CONDITIONS 1) Prices should be DDP delivery duty paid at DEWA stores. 2) Quotation to be submitted only in local currency U.A.E Dirhams 3) DEWA Standard payment terms is 30 days credit from the date of acceptance of material 4) No DEWA staff or his or her relatives up to third degree should have ownership or partnership in your company, and your participation in DEWA tenders / RFQs should not constitute a Conflict or perceived Conflict of Interest. Supplier Registration: https://srm.dewa.gov.ae/irj/portal/anonymous/regis Tender Link : https://srm.dewa.gov.ae/sap/opu/odata/sap/ZSRM_RFX_REG_BID_SRV/AttachmentSet(2332500883)/$value

Refer document

FileName	File Description
Global Tender Document	Tender Notice