Bids Are Invited For Hiring Of A Specialized Company To Supply Cast Iron Parts And Connections For Interconnecting Reinforced Concrete Reservoir With A Capacity Of 3,000,000 (Three Million) Liters Of Drinking Water Located In E.T.A, In Accordance With Annex I Of This Notice (Term Of Reference).
Bids Are Invited For Hiring Of A Specialized Company To Supply Cast Iron Parts And Connections For Interconnecting Reinforced Concrete Reservoir With A Capacity Of 3,000,000 (Three Million) Liters Of Drinking Water Located In E.T.A, In Accordance With Annex I Of This Notice (Term Of Reference).
350Mm With Flanges (Fff) In Cast Iron According To Nbr 7675, Pn 10, Internal And External Coating With Bituminous Painting. Accessories: Screws, Nuts And Washers, Galvanized According To Astm At 153 Class C And Elastomer Joint. Note: Tre Must Have Date Of High Relewed Manufacturing Up To 1 Year., Toco 350Mm In Flange Case With Flange (Pf) As Nbr 7675, Helap 0, 80M, Galvanized As Astm A 153 Class C And Plane Rubber Join. Flanged, Nodular Cast Iron Steering Wheel With Rubberized Wedge, Nbr 14968, Pn10 With The Following Accessories: Flat Rubber Board, Screws, Hexishes And Washers According To Astm A 153, Class C. Note: The Record Should Have A High -Relief Date Of Up To 1 Year. From Running Ductile Cast Iron With Mechanical Joint), According To Nbr 7677 And 7675, With The Respective Rubber Rings, Nuts And Stools Galvanized According To Astm A 153 Class C, With Pockets (Bb), For Pipes On Pressure Or Gravity). Note: The Part Should Have A High -Relief Date Of A Maximum Of 1 Year., Concentric Reduction With Pn10 Flanges Dn = 400 X 350 Mm *Bituminous Painting, With Accessories Included According To Nbr 7675, Pn 10. Note: The Piece Should Have A High -Relief Date Of Up To A Maximum Of 1 Year. 28/03/2025 With Flange Tip (Pf) According To Nbr 7675, Cast Iron Jm Dn = 400Mm Molten Iron (Running Glove Ductile Iron With Mechanical Joint), Concentric Reduction With Flanges Pn10 Cast Iron Dn = 400 X 600 Mm * Betumenous Painting, 22 ° Bag Pn10 Bag Pn10 Funded Iron Dn = 400Mm, Betumenous Painting, With Inclined Accessories, With Included Accessories, With Included Accessories According To Nbr 7675. Note: The Part Must Have A High -Relief Date Of Manufacture Of A Maximum Of 1 Year., Curve 90 ° Flange Flange Pn10 Cast Iron Dn = 400Mm, Blind Flange Pn10 Cast Iron Dn = 600Mm
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
