Tenders are Invited for Provision of Electric Line through Tubing Services, at Companys Operational Areas. The Proposed Award Strategy is Multiple Contracts of Five (5) Years Term with an Option of Two (2) Year Extension. Date Added: March 28, 2025 Deadline: 14/04/2025 Category: Oil & Gas The scope of Well Completion Services shall include, but not limited to the following: Contractor must be able to provide equipment and operational personnel to contractors that provide. Contractor shall provide completion equipment and services required to complete deviated or horizontal production and injection wells with casing/liner sizes of 9-5/8 and 7, open hole sizes of 6 through 8-1/2, and tubing sizes of 2-7/8, 3-1/2, and 4-1/2 with materials to include Corrosion Restraint Alloys. Contractor shall provide single and dual tubing completion equipment for 7 and 9-5/8 casing, for both carbon steel and corrosion resistant alloy (Chrome) and/or Internal Plastic Control. Contractor will be expected to provide the following but is not limited to: 1. Production packers and sump packers and associated accessories including setting/pulling tools. 2. Open-hole swellable packers. 3. Mechanical and hydraulic fluid loss control valves. 4. Hydraulic flapper, ball, and multi-positional type valves and all the necessary accessories to run different completion types (gravel/frac packed, non-gravel packed, stand-alone screens) including singles, duals, and horizontals. 5. Upper completion accessories to include gas-lift, mandrels, gas-lift valves, chemical injection mandrels and valves, water injection valves, hydraulic control lines & spoofers, cross coupling damps, surface controlled sub-surface safety valve (SCSSV) and associated specialty clamps, water injection valves, landing nipple-plug profiles, sliding sleeves, flow couplings/pups, blast joints, seal assemblies, crossovers, space-out pup joints proven with API and premium threads. 6. Hydraulic flapper type SCSSV (metal-to-metal sealing ability) with wireline lock-out protective sleeves, wireline SCSSV inserts, and associated running tools. 7. Slick-line deployed equipment to include straddle packers, bridge plugs, tubing isolation plugs (both nipple-less and for nipple profiles), elements for circulating plugs, plug packings and re-dress kits, well suspension barriers, lock mandrels, storm chokes, insert safety valves, and associated running tools. 8. Through-tubing gravel packing equipment: Vent screens, pack-off equipment, elastomers, and associated running tools. 9. Gravel/frac packing equipment: wire wrapped (8 through 12 gauge) and premium (including 250 micron) screens, blank pipe, packers rated for at least 10 ksi, circulation and gravel pack and frac pack completions, including uni-directional and bi-directional fluid loss devices capable of min, 10ksi burst and collapse. Complete service tool assemblies including crossover tools with proven rate and slurry test and in country performance records showing erosion rates over time for specific conditions. Crossover systems must include proven and interfacing tracer and density logging systems, with dimensional spaceouts recorded for gravel/frac packing in 7 and 9-5/8 casing. Wash pipe both plain and blast joint type, for high rate and high erosive velocity flow. Coatings that are proven compatible with given erosion rates per fraction simulations. Handling tools, screen tables and all associated accessories. Gravel/Frac pack service tools with weight down circulating and 6-inch packet bore capability. Downhole washpipe gauge systems. Contractor will provide fulltime Lagos-based Completions Technical Services Representatives required to consult with COMPANY Drilling & Completion Engineers and Logistical Coordinators to design, plan, and execute completion installations as per COMPANYs direction. Contractor will provide Senior Completion Specialists, Field Supervisors, Gas-lift Specialists, and Wireline Supervisors to install completion equipment at the well sites on call out basis. Contractor will be expected to maintain a base in Onne, Port Harcourt and/or Escravos to support Companys operations. Contractor will supply a Quality Plan outlining procedures to ensure that Company receives equipment that has been properly prepared for utilization. Dedicated QA personnel will be supplied by contractor to ensure rigorous adherence to Contractors Quality Plan. Quality Plan will define shop equipment required to makeup and test completion equipment prior to shipment offshore. Tender Link : https://etenders.com.ng/chevron-nigeria-limited-invitation-to-tender-for-provision-of-well-completion-services-jv/
