Kshs Hinged Key Diameter 63.5, Spindle Rotator 2D 146000, Size 85 Mm, Length Up To 100 Cm, Characteristics: P89x9n Diameter, Mm 89 Wall Thickness, Mm 9, Z-73 Z-73, Mass 42-48 Kg, Manometer Mp4u 0-40Mpa, Nb-32, Piston Size F -120Mm, Nb -32, Business Sleeve Cylinder Size F-120 Mm, Nb-32, The Diaphragm Ks-1001-00-000-1, Sleeve For Washing The Drilling Wells Size 38X58, 6.17 Mpa, Cuff Stem Piston 11Gri, 04-004 Rubber, Wa-C-C Short, But A Simple But Very Effective And Extremely Necessary Auxiliary Manual Mechanical Tool Used During Drilling Of Gas Or Oil Wells When Installing Or Dismantling The Pipe. The Wa-C Series Model Is Directly Used To Work With Pipes From 3 1/2 To 15 5/8 Inches, That Is, 88.9 ... 396.9 Mm., Appointment. Provides High -Quality Opening Of Productive Layers, Provides A Lubricant And Anti -Corrosion Effect On A Drilling Tool; Cools And Lubricates The Chisel; Prevents The Possibility Of Complications During Drilling (Differential) Grabbing, Absorption, Oil And Gas, Etc. 3. Technical Characteristics: - Density: * In Oil-Based Solutions-890-980 Kg/M3 * In Small Solutions-1050-1060 Kg/M3 * In Weighted Drilling Solutions - 2200 Kg/M3 Or More - The Content Of Barium Sulfate- 80-90% - Pirite Content - Less Than 6% - The Content Of Water-Soluble Salts- 0.35-0.45% - The Share Of The Fraction Of 5 Μm - 10-20% - Humidity Up To 2%, Bullet Tap Universal Mbu 74-120, Translators For Drill Columns Are Designed To Connect Parts Of The Drill Column And Attach The Tools Used For Drilling Wells To It. Translators For Drill Columns Are Made The Following Types: P - Transitional; M - Coupl; N - Nipples. Translators For Drill Columns Are Designed To Connect Parts Of The Drill Column And Attach The Tools Used For Drilling Wells To It. Translators For Drill Columns Are Made The Following Types: P - Transitional; M - Coupl; N - Nipple. Internal Size 50 Mm/Nar 73 Steel, Suitable For Operation In Difficult Conditions. It Is Equipped With Forged Lips And A Handle. The Chain Is Made Of Hardened Steel, Which Provides A Reliable And Quick Capture Of The Pipe. The Teeth On The Head Of The Chain Key Are Located On Both Sides To Work On The Principle Of A Rattle. Peculiarities: Forged Head And Handles. Easily Replaced Hardened Cheeks Made Of Special Steel For Use In The Oil And Gas Industry, As Well As During The Construction Of Pipelines. The Enhanced Forged Clamp Between The Chain And The Cheek Provides The Strength Of The Structure And The Safety Of Use. Technical Characteristics: Type Of Chain The Material Of The Working Part Is Hardened Steel Handle Material Hardened Steel Length 350 Mm Size Max 1 1/2 Weight 1.4 Kg, The Advantages Of The Chain Pipe Reed Wa36: Used For Products Of Any Shape Provides Safe, Reliable And High Torque Double Reverse (Therefore, More Economical) Sponges Provide Work As With A Ratchet Mechanism, In Any Direction Without The Need To Remove The Chain Key From The Pipe: The Direction Can Be Changed Without Removing The Chain The Unique Handle And The Design Of The Sponge Allow The User To Leave The Key On The Pipe During The Placement Of The Chain Into The Groove. Article 02070 Model Reed Wa36 Pipe Diameter 21 - 127 Mm 1/2 - 5 Maximum Pipes Diameter 180 Mm (7.1 ) Ground Load Of The Chain 6.51 Kg Length 832 Mm (33 ) Weight 7.5 Kg, The Remote Cylinder Set Of Lifting The Mast, Assembled Urb-2A-2, Breeded Drill Pipes (Ubt) Are Designed To Increase The Stiffness And Increase The Mass Of The Lower Part Of The Drill Column, Through Which The Load On The Loot Is Created. Scroll 146 Mm, Length 4 M, Thread 117 Mm, The Hydraulic Cylinder Of Lifting The Rotator 2-25-10-1 To Urb-2A-2, Substitute Fork, Drilling Pbv 3-50 Mm, Article Mz -73.000, Pipe Diameter, Mm - 89, Length, Mm - 535, Mass, Kg - 8.7
