Gravimeters-Strapdown Flight Engravimeter Including Proof Of Functionality. The Gravimeter Is Intended For Helicopter-Supported Heavy Measurements, Especially In The Field Areas. High-Resolution Anomal Cards And Geological Models Of The Subsoil Are To Be Derived From The Data Obtained. For Use In A Comparatively Small Helicopter, Which We Have Used In Recent Years And Will Use In The Next Few Years, The Geophysics Equipment Must Be Very Compact And Light. In Combination With The Magnetics Data Recording, The Payload Must Be Minimized And The Gravi Meter Itself Must Fit Into A 19-Inch Rack Cabinet. In Addition To The Heavy Field Measurement, The Magnet Field Strength With An Existing Data Acquisition System Is Also Determined In The Helicopter Measuring Flights Of The Polar Geolody. The Gravimeter Must Be Integrated Into A 19 -Inch Rack Cabinet And Connected To The Existing 28V Power Supply. In Addition To The Cabinet, There Is No Space For A Traditional Gravimeter With A Stabilization Platform (Typical Dimensions About 60X60x60 Cm Or More) In The Cabin Of An As350. The Means Of Transport To The Locations Also Limit The Size And Weight. Some Cargo Aircraft Can Only Carry Packs Of Up To Max. 80X80 Cm Because The Loadingukes Do Not Allow Any Larger Packages. The Costs Also Increase Significantly For Large And Heavy Pack Pieces. There Is Often Only A Small Hangar Or Parking Space Available At The Place Of Setting In The Polar Areas. Here, The Installation And The Conversion Is Significantly Simplified If Only A 19-Inch Rack Cabinet Moves, Installed And Wired. The Closet Also Serves As Protection Of The Installed Technology From Falls And Transport Damage. The Transport Capacities For The Field Camps Are Also Very Limited, So That The Reduction Of The Packages (In Number And Size) Brings Large Logistical Advantages. Even If The Measuring Helicopter Is Required For Other Uses At Short Notice, A Rack Cabinet Can Be Quickly And Easily Installed And Installed Again. This Would Not Be Possible With A Traditional Gravimeter, Which Must Be Precisely Measured And Anchored.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
