Arkan (Safety Rope) Rope Jute 12 Mm- Product Performed By Twisting Or Three-Strong Weaving, Resistance To Mold And Moisture Due To Bactericidal Protection. The Rope Does Not Accumulate Electricity, As It Has Good Antiquity. It Withstands A Gap Load Up To 450 Kg., Water Road Blocks The Standard Performance Is A Hollow Reservoir That Has A Wide Strong Base With Stiffener Ribs For Additional Stability, Which Narrows Up, Making It Similar To The Fence. You Can Fill The Sand Mixture Into It Or Pour Water Through The Upper Hole. This Type Of Barriers Has The Entire Body Of Water. The Areas Of The Use Of Road Blocks Are Not Limited Only To Problem Sections Of The Tracks. Among Their Basic Appointments Can Be Distinguished: * Reducation Of Flows Or Temporary Separation Of Vehicle Flows; * Designation Of The Venue Of Emergency Repair, Road And Construction Work; * Designation Of Parking Places In Airports, Hotels And Supermarkets; * Fence Of Emergency Road Sections; * Fencing Of Autrods During Sports; * Fencing Of Sites For Demonstrations, Concerts And Rallies; * Creation Of Barrier Barriers On Multi -Level Parking Lots. Unlike Metal And Concrete Analogues, Road Barriers Have A Shock -Absorbing Effect, Weigh Little And Serve For A Long Time. In The Case Of A Collision, The Obstacle Moves To A Small Distance, Reducing The Risk Of Serious Injuries And Absorbing The Power Of The Blow., The Cone Is Roadway, The Psh-1 Gas Mask Is A Single-Channel Insulating Respiratory Apparatus That Supplies The User With Clean Air Through The Air Supply Hose Due To Human Breathing. The Gas Mask Protects The Respiratory System, The Eyes And Face Of The User When Performing Work In Closed Containers, Wells, Tanks, Etc. Ingredients: Psh-1 Gas Mask Is Equipped With The Front Part Of The Smp-1 (1 Pc), The Hose Line (Rubber-Legged Air Supply To 10 M Long And Connecting Tube), The Filtering Element Of The Signaling And Rescue Rope. Rubber Air Supply Hose Is Reinforced With Wire Spiral To Reduce The Likelihood Of A Sharp Bend Or Flattening. It Is Recommended To Use Cotton Ammunition In A Fire And Explosive Atmosphere. Psh -1 Gas Mask Has A Performance - With An Air Supply Hose Rolled Into A Bay; Compliance With The Regulatory Document: Tr Ts 019/2011, Gost 12.4 236-2012 (Class 2). Hellet-Mask: Tr Ts 019/2011, Gost 12.4. 166-2018. Certification Of Tr Ts 019/2011., Filtering Gas Mask Gp-5 Size 4 Designed To Protect The Eyes, Skin Of The Face And Respiratory Tract From Bacterial Agents, Radioactive And Poisonous Substances In Gaseous Or Balanced State. The Elements Of The Gas Mask Are Connected Directly To Each Other, But Are Compatible With The Connecting Tubes Of Some Other Models. Characteristics The Weight Of The Gas Mask Assembly Is Not More Than 0.9 Kilograms; The Weight Of The Anti -Gas Box (Equipped) - 0, 25 Kg; The Weight Of The Front Part Of The Sm-62, Kg-0, 43; Shm-62U, Kg-0, 40: The Overall Dimensions Of The Gas Mask When Placed In A Bag- 120X120 × 270 Millimeters; The Overall Dimensions Of The Box, In Millimeters: Diameter - 112; Height With A Cap - 80; The Resistance Of The Gearbox Of The Anti -Gas (Equipped) Permanent Air Flow 30 L/Min, Mm Of Water. Art. - No More Than 19; The Resistance Of The Front Part Of The Permanent Air Flow Is 30 L/Min; On Inhalation, Mm Waters. Art. - No More Than 2; On Exhalation, Mm Waters. Art. - No More Than 10; The Resistance Of The Gas Mask Is A Constant Air Flow 30 L/Min; On Exhalation, Mm Waters. Art. - No More Than 10; On Exhalation, Mm Water. Art. - No More Than 10; The Gas Mask Should Be Airtight At An Overpressure Of 100 Mm Eg Eg - When Checking In A Water Bath For 8-10 Seconds, Air Bubbles Should Not Be Separated From The Surface Of The Box; The Front Part Should Be Sealed With A Vacuum Of 120 Mm Of Water. Art. And Should Not Give Falling Fluid Levels Along One Knee Of The Pressure Gauge By More Than 18 Mm For 1 Minute., Light Filters. Dimensions 110*90Mm. They Are Installed On The Welder Mask, Protect The Welder From Uv And Infrared Radiation, Face Burns, Visual Impairment. Their Use Is Mandatory For Welding. C6.7.8, Mask Welder Chameleon Welding Mask Chameleon With Sensors Of Automatic Dimming Of A Liquid Crystal Display When A Bright Arc Welding Is Detected [4]. The Welder Does Not Need To Be Lowered And The Welding Mask Is Lifted During Welding To Assess The Quality Of The Seam And Change The Electrodes, The Welding Mask Is Simple, The Individual Protection Tool Used In The Performance Of Certain Types Of Welding, To Protect The Eyes, Face And Neck From Burns, Ultraviolet Radiation, Sparks, Infrared Light And High Temperatures. Most Often Used During Electric Arc Welding, Welding With A Non -Melting Electrode And Semi -Automatic Welding In Protective Gases. Welding Masks Are Necessary To Prevent Ophthalmia (Inflammation Of The Cornea) And Retinal Burns Leading To Loss Of Vision. Both Types Of Damage Are Caused By Direct Exposure To Concentrated Ultraviolet And Infrared Radiation, In The Process Of Arc Welding* The Windows Are Made Of Tinted Glass. The Mask Itself Is Made Of Heat -Resistant Plastic Or Fibroparton., Box Filter (Fg-5Bv3), Monterian Safety, Stupid, Safety Belt, The Yellow Raincoat Has A Well -Designed Design And Is Designed To Ensure Comfortable Work In Conditions Of Strong Wind, Rain And Wet Snow. The Functionality Of The Cloak: The Central Fastener Of The Cloak Is Represented By A Zipper With A Windproof Valve. Sleeves Have Stacking Cuffs. Pockets Located On The Sides Are Equipped With Moisture -Proof Valves. A Convenient Construction Of A Cloak With A Zipper, A Valve Against The Wind, A Hood, Two Pockets With Valves, And A Waterproof Tissue Of At Least 5000 Mm Of A Water Column. Glued Seams: All Seams Of The Cloak Are Sealed With A Special Ribbon. Fabric: Strong Raincoat Fabric (100% Polyester) With Pvc Cover, Density 225 G/Sq.M. Water Use - At Least 5000 Mm Of Water. The Sizes Are Coordinated., Hot Hot Orange Gost R 12.4.207-99
