3 The Edges Of The Shield Are Stiffened Throughout The Perimeter By Double Bending Without Cuts, Narrowing, Including Corners Or Other Method Ensuring Adequate Stiffness Of The Sign. The Marks Must Comply With The Ordinance Of The Minister Of Infrastructure Of July 31, 2002 On Detailed Technical Conditions For Road Signs And Signals As Well As Road Safety Devices And The Conditions For Their Placement On The Roads (I.E., I.E. 2019.2311). In The Event Of A Change In The Existing Provisions, New Provisions Should Be Applied. 2) Reflective Foil Used For The Face Of The Characters:-Type 1, Exception To The Characters: A-7, B-2, B-20, D-6, D-6A, D-6B, T-27 Should Have A Type Of Reflective Foil 2. Signs With Type 2 Foil In Accordance With The Offer Form. 3) Reflective Films Used To Make Signs Must Have Valid Ibdim Technical Approvals (Issued Before 2017) Or Important National Technical Assessments. The Signs Must Have The National Certificate Of Conformity. 4) Each Supply Of The Characters Should Be Attached To Ibdim (Issued Before 2017) Or Important National Technical Assessments. 5) Blach Thickness: Signs A, B, C, D, F (Single -Element), E (One -Element), T, U 3A, U 3B, U 3C -1.25 Mm, E (Multi -Element) -1.5 Mm In Accordance With The Offer Form. The Warranty Period Has Been Specified In The Offer Form. 6) The Support Structure Should Be Used Galvanized Pipes With A Smooth Suture With A Diameter Of Ø 60.3 X 2.9 Mm.7) Fastening The Shields For Supporting Structures Should Be Made Using Connecting Elements, Handles, Screws, Screws, Screws, Screws Pads And Caps Made Of Hot -Dip Galvanized Steel Or Other Material Equally Resistant To Corrosion. Installation Of The Post In The Ground. 9) Reflective Signs Foiled In Accordance With The Assortment Given In The Offer Form. 10) Delivery At The Suppliers Expense According To The Employers Notification To The Headquarters Of Road District No. 1 In Ostróda, Ul. Grunwaldzka 62A, 14-100 Ostróda.11) Delivery At The Expense Of The Supplier According To The Employers Notification To The Headquarters Of The Road District No. 2 In Morąg, Ul. 3 Maja 11, 14-300 Morąg 13) Transport And Unloading Of The Goods On The Purchasers Square Are On The Contractors Side. 14) The Quantities Specified In The Offer Form Are Estimated Quantities, Given To Prepare And Submit An Offer. The Contracting Authority Reserves The Right To Change The Quantity (Reduction Or Increase) Of Ordered Road Signs And Road Safety Elements, As Well As Resignation From Orders For Individual Types (Types) Of Road Signs And Road Safety Elements, Compared To The Amount Indicated In The Offer Form. 2. Reasons Of Failure To Divide The Order Into Parts: The Subject Of The Order Is The Delivery Of A Year -Round Vertical Marking For The Needs Of The Poviat Roads Board In Ostróda For 2025. The Contracting Authority Does Not Plan To Divide The Order Into Parts, Because Its Size Does Not Constitute A Barrier To Order Access To The Sme. At The Same Time, The Division Of
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
