Data Sheet: General Information: The Alarm And Protection Cabinet Should Provide: - Processing Of Analog Signals Obtained From The Periphery; - Converting Analog Signals, According To The Algorithm Described Below; - The Formation Of External Tags, Their Processing And Transfer To The Hmi (Touch Control Panel), Which Is Included In The Delivery Kit (The Requirements Are Described In The Technical Specifications Below); - Visualization Of The Technological Process Described Below. Supreme Equipment: 1. Programmable Controller Aries Plk210-14-Cs-1Pc. Technical Characteristics: The Number Of Digital (Discrete) Inputs - 24 Pcs; The Number Of Discrete Output Channels Is 18 Pcs; The Number Of Relay Output Channels Is 18 Pcs; The Number Of The Rs-485 Interface-2 Pcs; The Number Of The Rs-232 Interface-1 Pc; The Number Of Ethernet 100 Base-T-4 Pcs; The Number Of Usb Interface (Usb-Rndis)-1 Pc; The Number Of Power Ports Is 2 Pcs. (Reserve And Basic); Power Voltage - From 10 To 48 V (Nominal 24 C) Direct Current; Power Consumption - 16 W; The Transition Voltage From The Main Voltage Source To The Reserve-6-9 V; Central Processor - Risc Processor Texas Instruments Sitara Am3358, 800 Mhz; The Amount Of Ram (Memory Type) - 256 Mb (Ddr3); The Volume Of Energy -Dependent Memory (Type Of Memory) - 64 Kb Is Available For Storing Files And Archives; Operating System - Linux Version Of The Nucleus 4.14.67; Protection Against Reinforcing - There Is; Connected Drives: Usb Host - 1 Pc.; Sd Card - 1 Pc.; Next To Watch Appendix 2, Data Sheet: General Information: Automation And Control Cabinet For A Steam Boiler Should Provide: - Data Collection From Temperature Sensors, Pressure, Flow; - Processing The Collected Data, According To Applied Software - The Algorithm (The Requirements Are Described In The Technical Specification Below), Which Is Part Of The Cabinet; - The Formation Of External Tags, Their Processing And Transmission To Hmi (General Viewing Panel); Supreme Equipment: 1. Programmable Controller Siemens Simatic S7-120 Cpu 1214C Dc/Dc/Rly-1Pc. Article: 6S7 214-1Hg40-0Xb0. Technical Characteristics: Designation Of The Type Of Product - Cpu 1214C Dc/Dc/Relay, Version Of Micro -Oprogram Support - V4.2, Software For Programming - Step 7 V14 Or Higher, Nominal Value (Post. Tok) - 24 In Post. The Current, The Permissible Range, The Lower Limit (Post. Current) Is 20.4 V, The Permissible Range, The Upper Limit (Post. Tok) - 28.8 V, Protection Against Confusing Polarity - Yes, The Load Voltage L+Nominal Value (Post. Current) - 24 In Post. Current, Load Voltage L+ Permissible Range, Lower Limit (Post. Current) - 20.4 V, Load Voltage L+ Permissible Range, Upper Limit (Post. Current) - 28.8 V, Current Consumption (Nominal) - 500 Ma; Only Cpu, Max. Current Consumption - 1,500 Ma; Cpu With All Expansion Modules, Max. Inclusion Current - 12 A; At 28.8 V, I²t - 0.8 A² • S, The Input Current For The Tire On The Rear Rack (5 In The Post. Current), Max. - 1 600 Ma; Max. 5 In Post. Current For Sm And Cm, Power Supply Of The Sensor 24 V - L+ Minus 4 In Post. Current Min., Normal Dispersed Power - 12 W, Built -In Operational Storage Device - 100 Kbyte, Built -In Loading Memory - 4 Mbyte, Inserting Memory Memory (Memory Card), Max. - With A Memory Card Simatic Memory Card, Storage In The Buffer - There Is, Storage In The Buffer Does Not Require Maintenance - Yes, Storage In A Buffer Without A Battery - Yes, Then Watch Appendix 2
