Tenders Are Invited For Purchase Of Branches

The Subject Of The Order Is The Delivery Of The Bruises Conditions And Technical Data Regarding The Subject Of The Contract:-Machine Factory New 2024/2025-A Fuel Powered By Fuel On/ Ethillin-Ethyl-Min. 2300 Cm3 Max 3000 Cm3 _Moc Minimum 80Km Max 90 Km- Combining Emission Standard Minimum Stage V- Maximum Diameter Of The Cut Material Minimum 300 Mm- Released Total Weight Minimum 2100 Kg Maximum 2500 Kg- Mobile Machine On The Chassis Equipped With A Single Axle With A Single Brake System And A Carbut Of A Car -Equipped With A Support (Jack) With A Minimum Pressure Of 3500Kg -External Dimensions Mm: A) Minimum Width Of 2000 Mm Maximum 2100 Mm B) Minimum Height 2400 Mm Maximum 2500 Mm C) Minimum Length 4800 Mm Maximum 5000 Mm -System With A Minimum Of Two Rollers (Diameter Of Each Cylinder Minimum 190Mm And A Minimum Width Of 400 Mm.) - Equipped With A Cylinder Lifting Cylinder Feeding Yoke - Equipped With An Emergency Stop System; Emergency Circuit Breakers And A Protective Band From The Bottom And Side Of The Tilting Table (Or Rigid Table) Of The Charging Basket In Accordance With The Current Safety Requirements For This Type Of Machine -Equipped With A Protective System In The Form Of A Engine Immobilizing Sensor (With An Open Cover/At An Attempt To Open The Knife Chamber Access Cover Cutting Engine) And A Pad Of The Shredding Lock Block With A Looped Padlock. -A Ejection Channel Equipped With A Deflector With The Possibility Of Rotating The Ejection Channel, Using A Chain Gearbox For Rotation Channel-Channel With A Fabric Height Adjustment System-Ejection Cranial Equipped With An Inspection Cover-Ejection Channel Equipped With An Inspection Cover (For Easy Removal Of The Process In The Situation Accidental Plumbing. - Equipped With A Knife Drum With A Minimum Diameter Of 600 Mm. , Which Is Aimed At Cutting The Cable In The Case Of Accidental Pulling It Together With The Material Served. - Equipped With A System (Drive) Front/ Stop/ Withdrawal- Equipped With A Starting Lock System With An Open Crushing Chamber- Equipped With Outline Lamps On Both Sides- Equipped With A Minimum Warning Rooster At Least 1 Pcs- Fuel Tank With A Capacity Of At Least 90 Liters- Display- Display Liquid Crystalline Machine Control System Showing The Basic Engine Operation Parameters (Speed, Loading, Temperature, Pressure, Etc.), Error Codes (Saved And Current If They Occur), Diagnostics Showing The Status Of Connection With Sensors Of Security Systems And Machine Control Elements, Technical Service Intervals (Filter Replacement/ Engine Oil, Replacement Of Phytra/Hydraulic Oil Of The Machine)-Shield-Fried Clutch Enabling The Disconnection Of The Crushing System From The Cutting Section For The Start-Up-Consciousness Of Approval Of Approval For Allowing Public Roads For The Chassis In Accordance With The Provisions In Force Within The Country-Installation Of Machine Service In Polish - Certificate- Engine Warranty And Engine Components At Least 24 Months/2500 Hours Whateve

Refer document

FileName	File Description
Global Tender Document	Tender Notice