Structural Steelworks – Ve307 - Steel Construction, Hydraulic Steel Construction Sw Alte Kinsach. Construction Site Equipment • Temporary Wooden Plank Covering (Approx. 71 M2) Rakes • Rakes (Approx. 0.5 Tons, Sheets And Hollow Profiles, Stainless Steel Including Accessories Such As Epdm Stop Plates, Chains, Locks Etc., Clear Opening Approx. 4.00 M Wide And 2.20 M Wide) Pipe And Line Construction • Steel Pipe Pressure Lines Dn 1200 (3 Strands With A Total Of Approx. 129 M Incl. Fittings, Structural Steel, Incl. Coating) • Wedge Flange Gasket Dn 900, Screw Set For Blind Flange Dn 900, Transport And Assembly Blind Flanges And Wedge Flange Gaskets Dn 900 • Ventilation Lines Dn 80 In Two Sections (3 Strands With A Total Of Approx. 27 M Including Fittings , Sealing Inserts, Stainless Steel) Shut-Off Devices • 2 Piece Of Gate Valve (Approx. 4.00 M Wide X 2.00 M High) For Subsequent Casting • Casting Work On Frame Profiles • Covers, Drive Stands, Protective Hoods, Relining, Permalubrication • Actuators • Maintenance Work Before Commissioning (Required Item) Railings, Handrails, Footbridges, Platforms , Covers, Ladders, Fall Protection, Stairs And Equipment • Railings And Handrails (Hollow Profiles And Sheets, Structural Steel, Hot-Dip Galvanized, Approx. 2.0 Tons) • Stirrups, Barrier Posts (Hollow Profiles And Sheets, Structural Steel, Hot-Dip Galvanized, Approx. 0.23 Tons) • Walkways, Platforms, Covers, Mobile Staircase Substructure (Bars, Shaped Steel, Sheet Metal, Structural Steel, Hot-Dip Galvanized, Approx. 10.4 Tons) • Walkways, Platforms, Covers, Mobile Stairs, Gratings 30X3 Mm (Mild Steel, Hot-Dip Galvanized, Approx. 91.0 M2) • Covers For Tear Plates Tr 8 Mm (Mild Steel, Hot-Dip Galvanized, Approx. 39 M2) • Fixed Ladders (Stainless Steel, Approx. 58 M Ladder Length, Incl. Entry Aids, Fall Protection Rails, Back Protection Basket, Protective Equipment, Etc.) • Horizontal Rail Safety Systems (Stainless Steel, Approx. 8 M) • Various Equipment (Signs, Security Chains, Locks, Wall Brackets, Etc.) • Grouting And Relining Work, End Supports And Floor Rails For Inspection Closures • Base Sleepers (Stainless Steel, Approx. 29 M) • Guide Rails (Stainless Steel, Approx. 54 M) • Grouting Work Crane System • Bridge Crane (Load Capacity 6.3 Tons, Track Center Dimension 9.05 M) • Crane Tracks (2 Strands, Continuously Supported, Crane Rails A45 Approx. 31 M, Continuous Elastic Bases Approx. 31 M, Continuous Base Plates Approx. 31 M, Crane Rail Clamps With Anchors Approx. 124 Pieces, Including Crane Track Buffers And Track End Securing) • Casting Work • Temporary Protective Covers, Test Load, Signage, Sling Chain General • Commissioning, Crane Testing, Commissioning • Test Assembly Inspection Closures • Instructions For Technical Processing • Planning Services, Documentation/Inventory Planning, Ce Markings, Ce Declaration Of Conformity • Crane Test Book • Instruction Protocols
