Supply And Installation Of Construction Plate With Galvanized Sheet And Wooden Structure. Af_03/2022_Ps, Rental Of Container 2, 30 *30* Hp, Operating Weight Of *3,500* Kg - Day Chp. Af_04/2017, Demolition Of Basalt Stone Flooring, Mechanized, Without Reuse, Local Administration, Preparation Of The Bottom Of A Trench Less Than 1.5 M Width, With A Layer Of Crushed Stone, Mechanized Launching. Af_08/2020, Concrete Pipe (Simple) For Rainwater Collection Networks, 200 Mm Diameter, Rigid Joint, Installation In Location With Low Level Of Interference - - Supply And Installation., Rectangular Passage Box In Masonry, Coated With Plaster , With Basalt Stone Cover, With Solid Ceramic Bricks, Internal Dimensions: 50 Af_06/2022, Dn 150 Mm, Masonry Grid With Flat Bar Metal Grid, Dimensions 6, 40 Set In Mortar, Including Transport Of Materials, Manufacturing, Assembly And Disassembly Of Formwork For Baldrame Beams, In Sawn Wood, E=25 Mm, 2 Uses. Af_01/2024, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5.0 Mm Ca-60 Steel - Assembly. Af_06/2022, Pillar Or Beam Frame Of Conventional Structure Of - Reinforced Concrete Using 8.0 Mm Ca-50 Steel - Assembly. Af_06/2022, Concrete Fck = 20Mpa, Ratio 1:2, 7:3 (In Dry Mass Of Cement/Medium Sand/Gravel 1) -Mechanical Preparation With Concrete Mixer 400 L.Af_05/2021, Reinforced Concrete Stairs And Steps And Mirrors Covered In Sawn Natural Basalt, Step Dimensions: 30 Cm And Mirrors: 20 Cm, Thickness 2 Cm, Laid - On Ac-Iii Adhesive Mortar, Plaster Or Single Putty In Mortar Trace 1:2:8, Mechanical Preparation With 400 L Concrete Mixer, Manually Applied On Blind Facade Panels (Without The Presence Of Gaps), - 25 Mm Thick. Af_08/2022, Premium Acrylic Latex Paint, Manual Application On Walls, Two Coats. Af_04/2023, Mechanized Excavation For Crowning Block Or Footing With Backhoe Loader (Including Excavation For Placing Formwork). Af_01/2024, Assembly And Disassembly Of Shoe Formwork, 1 Use. Af_01/2024, Manufacture Of Formwork For Beams, With Sawn Wood, E = 25 Mm. Af_09/2020, Manufacture Of Formwork For Pillars And Similar Structures, E=25 Mm. Af_09/2020, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 10 Ca-50 Steel, Sealing Masonry Of Hollow Concrete Blocks Of 14X19x29 Cm (Thickness 14Cm) And Laying Mortar Prepared In A Concrete Mixer. Af_12/2021, Chapisco Applied To Masonry And Internal Concrete Structures, Using A Trowel. Mortar Mix 1:3 Prepared In A 400L Concrete Mixer. Af_10/2022, Acrylic Sealer Base, Manual Application To Wall, One Coat. Af_04/2023, 1.10 M Stainless Steel Railing, With Cross Member And Two Heights Of 70 And 92 Cm, Circular Section, Following The Existing Standard Model On A Ramp, Fixed With - Mechanical Anchor, Including Supply And Installation., Rectangular Electrical Buried Box, In Masonry With Solid Ceramic Bricks, Background
