1. The Subject Of The Contract Are Construction Works Consisting In The Construction Of A Photovoltaic Installation With A Total Capacity Of 321.6 Kwp And An Energy Storage Facility With A Capacity Of 161 Kwh And A Power Of 100 Kw. The Numerical Code Of The Common Procurement Vocabulary (Cpv) For The Task In Question: 45000000-7 Construction Works 45261215-4 - Roof Covering Solar Cell Panels;45310000-3 - Electrical Installation Works;45210000-2 - Construction Works In Buildings;45300000-0 - Installation Works In Buildings;09332000-5 - Solar Installations;09331200-0 - Solar Photoelectric Modules;51112100-1 - Electricity Transmission Equipment Installation Services2. The Order Includes: 2.1. Prepare And Agree On Executive Documentation Meeting The Technical Conditions For Connecting Generation Installations To The Power Grid. The Documentation Should Be Prepared On The Basis Of Measuring, Securing And Supervising, As Well As Storing And Generating Electrical Energy Devices Provided By The Contractor. The Current Intermediate Electricity System At Mv Voltage 15Kv Should Be Adapted By Replacing The Existing Current And Voltage Transformers. Adaptation Of The Measurement System To New Working Conditions. The Existing Switching Devices In The Mv Switchgear Should Be Equipped With Contacts Reflecting The Position Of The Main Contacts. In The Existing Rgnn Switchgear, In One Of The Sections, Install A Circuit Breaker With An Electric Drive, Dedicated To Servicing The Planned Installations, In Place Of The Existing Reserve. The Outgoing Circuit Should Be Measured And Equipped With Appropriate Current Transformers And Voltage Circuits Necessary For The Proper Operation Of The Supervisory And Protection System. Install A New Rgpv Switchgear In The Lv Switchboard Room From Which All Elements Of The New Installation Will Be Powered. In The Rgpv Switchgear, Install A Main Disconnector, Surge Protectors And Protection In The Form Of Circuit Breakers With A Current Matched To The Powered Load. If Necessary, Equip The Circuit Breakers With Motor Drives. A Cabinet With Protections, A Field Controller And A Dc Power Plant, If Necessary, Should Also Be Installed In The Switchboard Room. Additionally, In The Section Of The Existing Rgnn Switchgear, Install An Outflow In The Form Of A Disconnector Supplying The Energy Storages Own Needs.2.2. In The Field, Near The Helipad, Build A Ground Photovoltaic Installation Consisting Of 340 Pcs. Photovoltaic Panels With A Unit Power Of 600Wp Each. P=340X0.6Kwp=204.0Kwp. The Panels Should Be Installed On Dedicated Metal Or Concrete Structures So That The Angle Of Inclination Is Not Less Than 20° Towards The South. A Zk-1 Cable Connector Should Be Placed In The Field, The Task Of Which Will Be To Collect The Electricity Produced In The Inverters And Transmit It To The Rgpv Switchgear Using A Dedicated 0.4Kv Lv Cable Line. 5 Pieces Are Designed. Identical Inverters With A Unit Power Of 50 Kw Each. Inverters With A Zk-1 Connector W
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
