The Pillowcase Is Made In The Size Of 50*60, 60*60 Or According To The Agreement With The Customer, (Depending On The Size Of The Pillows) From Bleached Calico With A Surface Density Of Not Less Than 120 G/M2, One-Piece Along The Length With A Valve Or Machined With A Valve. The Cross-Sections Of The Valve And Pillowcases Are Stitched With A Seam In The Hem. The Sides Of The Pillowcase Are Finished With A Linen Seam. The Valve Is Sewn From The Inside, With An Overlap Of At Least 15 Cm. Maximum Deviation In Length And Width (+-) 0.5 Cm. The Following Is Allowed In Pillowcases: - Cutting In The Transverse Direction; - Production Of Pillowcases From Two Equal Parts; - Production Of Pillowcases With Ties Fabric Requirements: Bleached Calico Weighing At Least 120 G/M2 Packaging-Pillowcases Are Tied In Bundles Of 25 Pieces, Placed In A Polyethylene Bag And Packed In A Fabric Bag Of 4 Bundles. The Corner Of The Pillowcase Is Stamped With Indelible Paint With The Date Of Issue And The Name Of The Manufacturer., The Bed Sheet Must Be Made Of Calico Bleached White, Which Must Meet The Requirements Of The Standard. The Finished Sheet Must Be Manufactured According To Gost Rk Bed Linen. General Technical Conditions St Rk 1013-99. The Size Of The Single Sheet In The Finished Form According To The Standard Is 203*120 Cm. The Maximum Deviation From The Nominal Basic Measurements Is Allowed: (+-) 2.5 Cm In Length, (+-) 1.5 Cm In Width. In Sheets, The Following Is Allowed: - Cut In Transverse Direction; - Production Of Products With A Fringed Edge; - One Lower Extension Measuring 20-30 Cm And One Transverse Extension Measuring 25-40 Cm; - Production Of Bed Sheets From The Material Of The Cotton Assortment, Cut Into Two Or One And A Half Sheets. Fabric Requirements: Bleached Calico With A Weight Of At Least 120 G/M2. Packaging - Sheets Are Tied In Bundles Of 25 Pieces, Placed In A Polyethylene Bag And Packed In A Fabric Bag Of 2 Bundles. The Corner Of The Product Is Stamped With Indelible Paint With The Date Of Issue And The Name Of The Manufacturer. Agree With The Customer.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
