Impact Wrench Designed With Xgt Technology, For Even Heavier Applications. 1,800 N.M Of Tightening Torque And 2,050 N.M Of Reversing Torque. Approximately 350 Tightenings On M27 High Strength Screws. 3 Tightening/Loosening Modes.Specifications:- Standard Screw: M12-M36- High Strength Screw: M10-M27- Fitting: 19Mm Square (3/4)- Maximum Rotations Per Minute: 0-1,800High: 0-1,400Average: 0 -1,150Low: 0-950- Impacts Per Minute Maximum: 0-2,500High: 0-2,400Average: 0-2,200Low: 0-1,900- Tightening Torque1,800 N.M- Reversal Torque2,050 N.M, Pneumatic Impact Wrench 3 /4Made With A Cast Aluminum Body That Provides Greater Resistance. - Suitable For Fixing And Loosening Screws And Nuts With A Diameter Of Up To 1 - Used In Industries, Workshops, Automotive Centers, Metallurgical Plants, Among Others - Works With A Double Hammer Impact System That Provides Greater Impact Force - Technical Specifications: Maximum Tightening Diameter Or Loosening The Pneumatic Impact Wrench: Screws Up To 1 - Air Consumption Of The Pneumatic Impact Wrench: 9.5 Pcm (Foot³/Min) - Fitting Measurement Of The Pneumatic Impact Wrench: 3/4 - Maximum Torque Of The Impact Wrench Pneumatic: 1600 Nm (Approx. 163 Kgf/M) - Rotation (Rpm): 4,200 - Working Pressure Of The Pneumatic Impact Wrench: 90 Lbf/In² / 6, 33 Kgf/Cm² - Air Inlet Thread Of The Impact Wrench Pneumatic: 3/8 Npt Female - Type Of Reversal System: Pin - Internal Diameter Of The Hose Suitable For Pneumatic Impact Wrench: 1/2 - Includes: 1 Allen Key And 1 Auxiliary Handle, Combination Wrench Set - Containing 24 Pieces 06Mm To 32Mm Set Of Combined Wrenches, Consisting Of A Support With 24 Wrenches, Of Which: 6Mm; 7Mm; 8Mm; 9Mm; 10Mm; 11Mm; 12Mm; 13Mm; 14Mm; 15Mm; 16Mm; 17Mm; 18Mm; 19Mm; 20Mm; 21Mm; 22Mm; 23Mm; 24Mm; 26Mm; 27Mm; 28Mm; 30Mm; 32 Mm. Produced In Chrome Vanadium Steel, Fixed Wrench Set - Containing 12 Pieces 06Mm To 32 Mmfixed Wrench Set, Composed Of A Support With 12 Wrenches, Being: 6 Mm X 7 Mm, 8 Mm X 9 Mm, 10 Mm X 11 Mm, 12 Mm X 13 Mm, 14 Mm X 15 Mm, 16 Mm X 17 Mm, 18 Mm Mm And 27 Mm X 32 Mm. Produced In Chrome Vanadium Steel, Grifo Wrench 12Jaws And Handle Made Of Steel, 42Mm Jaw Opening - Measure 12 (300Mm), 10/17/2024, Pressure Pliers 1010 Inch Pressure Pliers. - Made Of Steel - Adjustable Opening - Must Have Parallel Prefecture Broached Teeth - Length: 10 (230Mm) - Maximum Mouth Opening: 30 Mm., Adjustable Wrench 18Made Of Steel, Jaw Opening Of 53Mm - Size 18, Wrench Kit Screwdriver And Phillips, Containing 7 Pieces Composed Of 7 Keys, 4 Screwdrivers 1/8 125 Mm), 5/16 X 8 (8 X 200Mm) And 3 Cross Screwdrivers (Phillips)3/16 X 8 (Ph8 Combination. Produced In Steel, Hardened And Tempered And Ergonomic Handles., Screw Extractor Kit, Containing 5 Pieces, Produced In Steel - External Measurement: 100Mm - Internal Measurement: 10Mm., Tire 1400/24 For Application On Motor Grader, 16 Plies .G2 L-2, S/C. Cr/App-Ibama. Note-Manufacturer/Reseller. Inmetro Certificate. Manufacturing Date Not Exceeding 12 Months. Benchmarks: Equal Or Higher Than Durable/G2.,
