White Enamel Pf-115. (Glossy) Description It Is A Suspension Of Titanium Dioxide Of The Rutile Form And Other Pigments And Fillers In Pentaphthalic Varnish With The Addition Of A Drying Agent, Solvents And Targeted Additives. Purpose It Is Intended For Painting Metal, Wooden And Other Surfaces Exposed To Atmospheric Influences And For Painting Indoors. The Enamel Film Is Resistant To Temperature Changes From Minus 50 To Plus 60 ºс. Technical Characteristics 1. Enamel Coating Color. The Gloss Of The Coating According To The Photoelectric Gloss Meter, %, Not Less Than 50 5. The Mass Fraction Of Non-Volatile Substances, %, Depending On The Color 49-70 White Color 6. The Degree Of Dilution To A Viscosity Of 28-30 S According To The Viscometer Type Vz-246 With A Nozzle Diameter Of 4 Mm At A Temperature Of (20.0±0.5)ºс, %, Not More Than 20 7. The Degree Of Grinding, Μm, Not More Than 25 8. Coverage Of The Dried Film, G/M2, Not More, Depending On The Color 30-120 9. Drying Time To Degree 3 At A Temperature Of (20±2)ºс, H, Not More, For Flower Enamels: 24 10. Elasticity Of The Film When Bending, Mm, Not More Than 1 11. Strength Of The Film When Struck By A U-1 Type Device, Cm , Not Less Than 4 12. Hardness Of The Coating According To The Tml Type Pendulum Device (Pendulum A), Relative Units, Not Less Than 0.10 13. Film Adhesion, Points, Not More Than 1 14. Resistance Of The Coating At A Temperature Of (20±2)ºс To Static Exposure To Water, H, Not Less Than 2 15. Resistance Of The Coating To The Static Effect Of A 0.5% Detergent Solution, Min, Not Less Than 15 16. Resistance Of The Coating At A Temperature Of (20±2)ºс To The Static Effect Of Transformer Oil, H, Not Less Than 24 17. Gost Notes: When Applying Enamels, Hot Drying Of The Coating Is Allowed At A Temperature Of (105-110) °C For 1 Hour. Packaging Metal And Plastic Containers In Containers Of 20 Liters Each. Gost 6465-76 Without Odor, Water Emulsion, White, St Rk Gost R 52020-2007 For Painting Walls And Ceilings Indoors. The Volume Is Not Less Than 20 Kg. Odorless, Non-Toxic., Finishing Polymer Putty, St Rk 1168-2006, Brown (Glossy) Enamel. Technical Characteristics: Enamel Brown Pf-115. (Glossy) Description It Is A Suspension Of Titanium Dioxide Of The Rutile Form And Other Pigments And Fillers In Pentaphthalic Varnish With The Addition Of A Drying Agent, Solvents And Targeted Additives. Purpose It Is Intended For Painting Metal, Wooden And Other Surfaces Exposed To Atmospheric Influences And For Painting Inside Premises. Enamel Coatings Have High Protective And Decorative Properties. The Film Combines Sufficient Hardness With High Elasticity And Durability. The Enamel Film Is Resistant To Temperature Changes From Minus 50 To Plus 60 ºс. A Coating Consisting Of Two Layers Of Pf-115 Enamel, Applied To A Prepared Primed Surface, In A Moderate And Cold Climate Retains Protective Properties For Four Years Up To A Score Of No More Than Az1 And Decorative Properties For One Year Up To A Score Of No More Than Ad2. Technical Characteristics 1. The Color Of The Enamel Coating Must Be Within The Limits Of Permissible Deviations Established By The Color Samples Of Kartoteka Or Control Color Samples Approved In The Established Order. 2. Appearance Of The Coating After Drying, The Enamel Should Form A Smooth, Uniform Surface Without Flaking, Pimples, Drips, Wrinkles And Extraneous Inclusions. Small Shagreen Is Allowed. 3. Gloss Of The Coating According To A Photoelectric Gloss Meter, %, Not Less Than 50 5. Mass Fraction Of Non-Volatile Substances, %, Depending On The Color 49-70 Brown Color 6. Degree Of Dilution To A Viscosity Of 28-30 S According To A Vz-246 Type Viscometer With A Nozzle Diameter 4 Mm At A Temperature Of (20.0±0.5)ºс, %, No More Than 20 7. Degree Of Grinding, Μm, No More Than 25 8. Coverage Of The Dried Film, G/M2, No More, Depending On The Color 30-120 9. Drying Time To Degree 3 At A Temperature Of (20±2)ºс, H, No More, For Flower Enamels: 24 10. Packaging Metal And Plastic Containers In Containers Of 10 Liters Each. Gost 6465-76 Without Odor, Spray Gun-Whitening Hand-Operated, Piston, Water Consumption L/Min 1.4; Working Pressure Mpa 0.5; Productivity M2/Time 250; Weight Not Less Than 9 Kg, Overall Dimensions 290*130*610 Mm Length*Width*Height; Suction Sleeve 9*1.5 Mm*M D*L; Pressure Sleeve 6*5 Mm*M D*L; Tank Capacity 3 L, Rod Length 1.5 M. For Painting Surfaces By The Method Of Airless Spraying With Compositions With A Density Of Up To 1300 Kg/M3 When Performing Painting Works. Without Scaffolding And Ladders, It Is Possible To Apply To A Height Of Up To 4 Meters And To Process Up To 250 M2 Of Surface In Time. St Rk Iso 8026-2011, Cement M-450, The Enamel Is Blue (Glossy). Technical Characteristics: Enamel Blue Pf-115. (Glossy) Description It Is A Suspension Of Titanium Dioxide Of The Rutile Form And Other Pigments And Fillers In Pentaphthalic Varnish With The Addition Of A Drying Agent, Solvents And Targeted Additives. Purpose It Is Intended For Painting Metal, Wooden And Other Surfaces Exposed To Atmospheric Influences And For Painting Inside Premises. Enamel Coatings Have High Protective And Decorative Properties. The Film Combines Sufficient Hardness With High Elasticity And Durability. The Enamel Film Is Resistant To Temperature Changes From Minus 50 To Plus 60 ºс. A Coating Consisting Of Two Layers Of Pf-115 Enamel, Applied To A Prepared Primed Surface, In A Moderate And Cold Climate Retains Protective Properties For Four Years Up To A Score Of No More Than Az1 And Decorative Properties For One Year Up To A Score Of No More Than Ad2. Technical Characteristics 1. The Color Of The Enamel Coating Must Be Within The Limits Of Permissible Deviations Established By The Color Samples Of Kartoteka Or Control Color Samples Approved In The Established Order. 2. Appearance Of The Coating After Drying, The Enamel Should Form A Smooth, Uniform Surface Without Flaking, Pimples, Drips, Wrinkles And Extraneous Inclusions. Small Shagreen Is Allowed. 3. The Gloss Of The Coating According To The Photoelectric Gloss Meter, %, Not Less Than 50 5. The Mass Fraction Of Non-Volatile Substances, %, Depending On The Color 49-70 Blue Color 6. The Degree Of Dilution To A Viscosity Of 28-30 S According To A Vz-246 Type Viscometer With A Nozzle Diameter 4 Mm At A Temperature Of (20.0±0.5)ºс, %, No More Than 20 7. Degree Of Grinding, Μm, No More Than 25 8. Coverage Of The Dried Film, G/M2, No More, Depending On The Color 30-120 9. Drying Time To Degree 3 At A Temperature Of (20±2)ºс, H, No More, For Flower Enamels: 24 10. Packaging Metal And Plastic Containers In Containers Of 10 Liters Each. Gost 6465-76 Without Odor
