1.1. The Mig System For Semi-Automatic Welding Consists Of A Source Of Direct Current, A Wire Feeding Device, A Coil, A Torch And A Gas Cylinder. The Current Is Applied To The Arc Through The Welding Wire, Which, Melting, Is Transferred To The Welded Material. The Name Of The Indicator Standard According To Gost (Tu) Diameter Of Mig Welding Wire, Mm 0.8/1.0/1.2/1.6 Range Of Thickness Of The Base Metal, Mm 0.5-20.0 Mig Power Consumption, Kva 14.6 Mma Power Consumption, Kva 15.7 The Maximum Weight Of The Coil, Kg 15 2. Requirements For The Delivered Goods 2.1. The Welding Device Must Be Manufactured In Accordance With The Requirements Of The Established Standards According To The Technological Regulations Approved In The Established Order. 2.2. The Product Must Be Of Category 1, Delivered In The Packaging Of The Manufacturer, Ensuring Tightness And Safety, With Accompanying Documents Confirming The Origin Of The Product (Labels, Passports Indicating The Nomenclature Of The Product, Batch, Date, Year Of Manufacture). 4.1. The Quality Of The Delivered Goods Must Correspond To The Current Standards And Technical Conditions Of The Manufacturing Plant (Repair Enterprise); 4.2. The Service Life Of The Supplied Goods Must Be Established In Accordance With The Manufacturers Documentation; 4.3. The Warranty Period Of The Delivered Goods Must Be Not Less Than 6 Months, Including Operation And Storage, From The Date Of Signing The Deed Of Acceptance And Transfer Of The Product. Year Of Release Of The Product: No Earlier Than 2024., The Welding Machine Is Used For Mig-Mag, Mma Welding, As Well As Gasless Welding With Powder Wire. This Model Is Distinguished By The Presence Of Synergetic Control With The Help Of A Handle. The Inverter Can Be Used During Construction And Installation Work, As Well As In A Car Workshop. The Technique Has Excellent Controllability, Friction Stability And Control Due To The Fact That It Works At A Frequency Of 60 Hz. The Name Of The Indicator Standard According To Gost (Tu) Type Of Quarrel Arc Supply Voltage, Volts 220±10 Operating Voltage Range, Volts 140-260 No-Load Voltage, Volts 80 Range Of Welding Current, Amperes 10-160 Duty Cycle At Maximum Welding Current, % 70 Current Consumption, Amperes 22 Power, Kw 4.8 Protection Class Ip21 Applied Electrode 1-4 The Length Of The Electric Power Cable With A Section Of 2.5-3 Mm, Meters Not Less Than 10 The Length Of Electric Cables For Welding Is 2.5-3 Mm Two Pieces Of 5 Meters Each Mass No More, Kg 10 2. Requirements For The Delivered Goods 2.1. The Welding Device Must Be Manufactured In Accordance With The Requirements Of The Established Standards According To The Technological Regulations Approved In The Established Order. 2.2. The Product Must Be Of The 1St Category, Delivered In The Packaging Of The Manufacturer, Ensuring Tightness And Safety, With Accompanying Documents Confirming The Origin Of The Product (Labels, Passports Indicating The Nomenclature Of The Product, Batch, Date, Year Of Manufacture). The Quality Of The Delivered Product Must Meet Current Standards And The Technical Conditions Of The Manufacturing Plant (Repair Enterprise); 4.2. The Service Life Of The Supplied Goods Must Be Established In Accordance With The Manufacturers Documentation; 4.3. The Warranty Period Of The Delivered Goods Must Be Not Less Than 6 Months, Including Operation And Storage, From The Date Of Signing The Deed Of Acceptance And Transfer Of The Product. Year Of Release Of The Product: No Earlier Than 2024.
