1 Manufacture And Installation Of A Light Box. Preparation And Installation Of Light Boxes (Light Boxes). Size: Height Not Less Than 80 Cm, Width Not Less Than 50 Cm, Thickness Not Less Than 20 Cm. Mounting Bracket Made Of Profiled Iron Not Less Than 40X20 Cm, Thickness Not Less Than 3 Mm. The Iron Bracket Is Completely Painted. The Color Of The Paint Is Coordinated With The Customer. Before Painting, It Is Sandblasted, Primed, And Then Painted With A Special Airless Sprayer So That The Painted Paint Is Smooth And Uniform. A Single-Layer Bracket Intended For A Light Box With A Size Of At Least 50X80x20 Cm, Prepared By Special Welding, Is Attached To An Electric Pole, Keeping A Distance Of At Least 20 Cm From The Electric Pole. At Least 30 Cm From The Inner Surface Of The Column, At Least 30 Cm From The Outer Surface Of The Column, It Is Attached To A Profile Pipe With A Thickness Of At Least 20X40 Cm, A Thickness Of At Least 3 Mm And A Length Of At Least 40 Cm By Means Of 2 Studs With M24 Mm Nuts. A Double Lightbox, Which Is Prepared And Installed Separately On Both Sides Of The Bracket, Makes Up A Whole Lightbox. All 40 Light Boxes Installed On The Columns Must Be Measured From Above And Below With A Spirit Level To Ensure Uniform Straightness. Each Lightbox Must Be Installed Using A Level. The Light Box Should Be Attached To 40 Columns, Starting From The Lit Christmas Tree, Which Is Determined By The Customer. The Material Of The Lightbox Is Completely White Matte Acrylic With A Thickness Of At Least 10 Mm. The Light Box Must Be Installed At A Height Of At Least 4 Meters From The Ground. Acrylic Should Be Completely Glued With Strong Mounting Glue, While The Seams Should Not Be Visible. In Addition, Acrylics Must Be Fixed To Each Other With A Screw Of A Unique Color, Which Is Invisible. Both Sides Of The Lightbox Must Be Decorated With 2D-Illustrated Engravings Of Different Colors. When Installing Images, All Requirements Must Be Met. The Topic Of The Images Is Agreed With The Customer.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
