Oxygen Cylinder Reducer Complete With Manometers (Bko-5-4); Brass Body, Inlet Pressure Up To 200 Mpa; Output Pressure Up To 1.25 Mpa; Input Connection G3/4; Output Connection M16*1.5+Nipple 6.3/9Mm; Weight 1.53 Kg; Input Pressure 15 Mpa; Output Pressure Up To 1.25 Mpa; Gear Set: Pressure Gauge At The Inlet And Outlet. Gost 13861-89., Shut-Off Valve, Flanged, Steel With Sealing Rings Made Of Stainless Steel 15С22нж. Du-50Mm; Ru-40 Kgf/Cm²; The Working Environment Is Superheated Steam T=425°С; Construction Length - 230 Mm; The Outer Diameter Of The Flange Is 160 Mm; Diameter Of Hole Centers D1-125Mm; The Outer Diameter Of The D2 Gasket Is 102Mm; The Diameter Of The Hole Is 18Mm; N-4Pcs; Weight - 20 Kg. Body, Cover, Spindle, Spool Steel. The Valve Can Be Installed In Any Position. Gost 3326-86., Propane Sleeve, For Gas Metal Cutting Class 1, (Propane, Acetylene), D-9Mm, Working Pressure 0.63 Mpa. Gost 9356-75., Shut-Off Valve, Flanged, Made Of Malleable Iron With Sealing Rings Made Of Stainless Steel 15Кчч16нж. Du-40Mm; Ru-25 Kgf/Cm²; Working Environment - Superheated Steam T=300°С; Construction Length - 200Mm; The Outer Diameter Of The Flange Is 145Mm; Diameter Of Hole Centers D1-110Mm; The Outer Diameter Of The D2 Gasket Is 88Mm; The Diameter Of The Hole Is 18Mm; N-4Pcs; Weight - 11.5 Kg. Body, Lid - Malleable Cast Iron; Spindle, Spool Steel. The Valve Can Be Installed In Any Position. Gost 18722-73., Sleeve For Gas Cutting, Oxygen Class 3, D-9Mm, Working Pressure 0.63 Mpa. Gost 9356-75., The Propane Cutter, Injector, Is Intended For Manual Gas-Oxygen Cutting (Cutting) Of Sheet And Grade Metal From Low-Carbon Steel, Up To 300 Mm Thick. Cutter Dimensions: 550Mm*130Mm*60Mm. Weight - 0.83 Kg; Input Connections M16*1.5; Nipple D-6.3/9Mm; The Angle Of Inclination Of The Head Is 90°. Complete With One Outer Mouthpiece And Four Inner Mouthpieces For Cutting Metal Of Different Thicknesses. The Working Temperature Of The Environment Is From 20°С To +40°С. Gost 5191-79., Propane Cylinder Reducer, Complete With Manometers (Bpo-5M) Propane Reducer, Single-Stage, Intended For Lowering And Maintaining Propane Gas Pressure At The Required Level During Gas-Flame Work. Input Pressure Up To 2.5Mpa; Working Pressure Up To 0.3 Mpa; Brass Body; Input Connections - Threaded: W21.8-14 Threads On 1-Lh; The Outlet Connection Is A Fitting For A Hose With A Clamp M16*1.5Lh. The Reducer Is Complete With A Pressure Gauge. Gost 13861-89.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.