7598480 Standard Measure Of Hardness Mtr-K2 2 Grades (25±5) Hrc., 7598485 Standard Mtb-K2 Hardness Tester 2 Categories (400±50) Hв 10/3000. They Are Intended For Verification/Calibration, As Well As Adjustment And Control Of The Performance Of Instruments For Measuring The Hardness Of Metals And Alloys., 7598483 Standard Mtb-K2 Hardness Tester 2 Categories (100±25) Hv 10/1000. They Are Intended For Verification/Calibration, As Well As Adjustment And Control Of The Performance Of Instruments For Measuring The Hardness Of Metals And Alloys., 7598473 Sample Ho -30-65°-4.5X2.4 St.20. Setting Sample For Ultrasonic Defectoscopes. The Material Of The Samples Is St20 Steel., 7598471 Sample Ho -20-2.5X2.0 Art.20. Setting Sample For Ultrasonic Flaw Detectors. The Material Of The Samples Is St20 Steel., 7598475 Sample Ho -10-65°-2.0X2.0 Art.20. Setting Sample For Ultrasonic Defectoscopes. The Material Of The Samples Is St20 Steel., 7591547 Samples Of Surface Roughness (Comparison) Oshs-Shp Rz 20...80: The Shape Of The Samples Is Flat (Rz 20; 40; 60; 80), 7598469 Sample Ho -25-65°-4.0Х1.9 Art.20. Setting Sample For Ultrasonic Flaw Detectors. The Material Of The Samples Is St20 Steel., 7598486 Universal Welder Template Ushs-3. It Is Used To Control The Quality Of Welds And Allows To Determine The Parameters Of Defects, Such As Gouges, Gaps, Blunting, Bevel Angles And Overhanging Edges. (Controllable Parameters: 1. Cutting Angle (Bevel Of Edges) 0 - 45°; Edge Offset 0 - 15 Mm; Dimension Of Blunting And Seam Width (Ruler) 0 - 50 Mm; Height Of Butt Seam Reinforcement 0 - 5 Mm; Depth Of Seam Concavity 0 - 15 Mm; 0 - 15 Mm Seam Depth; 1 - 4 Mm Gap Size /2/2.5/3/3.25/4/5)., 7598481 Reference Hardness Measure Mtr-K2 2 Grades (45±5) Hrc. They Are Intended For Verification/Calibration, As Well As Adjustment And Control Of The Performance Of Instruments For Measuring The Hardness Of Metals And Alloys., 7598484 Mtb-K2 Standard Hardness Tester 2 Categories (200±50) Hv 10/3000. They Are Intended For Verification/Calibration, As Well As Adjustment And Control Of The Performance Of Instruments For Measuring The Hardness Of Metals And Alloys., 7598479 No Utyuk 65°; Ø12mm; Ø3mm; H10; H20; H30; H40; Article 20., 7598470 Sample Ho -35-65°-4.5X2.4 St.20. Setting Sample For Ultrasonic Flaw Detectors. The Material Of The Samples Is St20 Steel., 7598472 Sample Ho -6.5-70°-2.0X1.2 Art.20. Setting Sample For Ultrasonic Defectoscopes. The Material Of The Samples Is St20 Steel., 7598476 Sample Ho -60/6-70°-1.3X1.2 Art.20. Setting Sample For Ultrasonic Flaw Detectors. The Material Of The Samples Is St20 Steel., 7598482 Standard Measure Of Hardness Mtr-K2 2 Grades (65±5) Hrc. They Are Intended For Verification/Calibration, As Well As Adjustment And Control Of The Performance Of Instruments For Measuring The Hardness Of Metals And Alloys., 7598477 Sample Ho -32/4.5-70°-1.3X1.2 Art.20. Setting Sample For Ultrasonic Flaw Detectors. The Material Of The Samples Is St20 Steel., 7598478 Sample No -1-2.5-5-7.5-10-12.5-15. Setting Sample For Ultrasonic Flaw Detectors. A Sample Step. The Material Of The Samples Is St20 Steel., 7598474 Sample Ho -40-65°-5.0Х3.1/50°-4.0Х2.0 Art.20. Setting Sample For Ultrasonic Flaw Detectors. The Material Of The Samples Is St20 Steel.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.