Igi The Material Is Bitumen-Polymer. Brand Tpp. The Material To Be Applied Is The Bottom Layer. Type Of Coating Of The Upper Side: Film. Type Of Coating Of The Welded Side: Film. Dimensions: Length: Not Less Than 10 M, Thickness: Not Less Than 2.8 Mm, Width: Not Less Than 1000 Mm. The Area Of The Material In The Package: Not Less Than 10 M². Flame Spread Group: Rp4. Water Absorption Within 24 Hours By Mass No More: 1%. Flammability Group: B3. Combustibility Group: G4. Mass Of 1 M²: Not Less Than 5 Kg. The Mass Of The Binder On The Welded Side: Not Less Than 2 Kg/M². Base Material: Fiberglass. Breaking Force In The Transverse Direction, N/50 Mm: 1100. Breaking Force In The Longitudinal Direction, N/50 Mm: 1000. Flexibility Temperature On The Bar R=25 Mm: -20 °C. Brittleness Temperature Of The Binder: -30 °C. Heat Resistance: 100°C. Color: Series. Gost 30547-97. Certificates. S/C Makanchi, Igi The Material Is Bitumen-Polymer, Tkp Brand. The Material To Be Coated Is The Top Layer. Type Of Coating Of The Upper Side: Coarse-Grained Sprinkle. Type Of Coating Of The Welded Side: Film. Dimensions: Length: Not Less Than 10 M, Thickness: Not Less Than 3.8 Mm, Width: Not Less Than 1000 Mm. The Area Of The Material In The Package: Not Less Than 10M². Flame Spread Group: Rp4. Water Absorption Within 24 Hours By Mass, %, No More: 1. Flammability Group: B3. Combustibility Group: G4. Mass Of 1 M²: Not Less Than 5 Kg. The Mass Of The Binder On The Welded Side: Not Less Than 2 Kg/M². Base Material: Fiberglass. Upper Surface Coating Material: Shale. Sprinkling Loss: No More Than 15G/M². Breaking Force In The Transverse Direction, N/50 Mm: 1100. Breaking Force In The Longitudinal Direction, N/50 Mm: 1000. Flexibility Temperature On The Bar R=25 Mm: -20 °C. Brittleness Temperature Of The Binder: -30 °C. Heat Resistance: 100°C. Color: Series. Gost 30547-97. Certificates. S/C Makanchi
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.