Bids Are Invited For The Object Of This Tender Is The Acquisition Of Equipment For Outdoor Gyms For Installation In Public Leisure Areas In The Municipality Of Porto União, With The Other Characteristics Detailed In The Terms Of Reference (Annex Ii) And In The Preliminary Technical Study (Iii).
Bids Are Invited For The Object Of This Tender Is The Acquisition Of Equipment For Outdoor Gyms For Installation In Public Leisure Areas In The Municipality Of Porto União, With The Other Characteristics Detailed In The Terms Of Reference (Annex Ii) And In The Preliminary Technical Study (Iii).
Double Abdominal Plank: For Two Users Simultaneous Abdominal Exercises. Strengthens The Abdominal Muscles. Manufactured With Carbon Steel Tubes Measuring At Least 2 X 2 Mm; Oblong Carbon Steel Tube Measuring At Least 16 X 30 X 1.5 Mm; Carbon Steel Plates Of At Least 3 Mm. Polyester Electrostatic Powder Painting, Mig Welding. Allows The Use Of 2 (Two) Simultaneous Users And Offers Complete Security. Installation In Closed Or Outdoor Areas, Resistant To Weather Actions. Fixing The Device To The Ground Using A Parabolt Anchor. Product Identification Sticker, Muscles Exercised And Tips For Use And Functions Of The Device, Manufacturer Data And Contact For Technical Assistance. Height: 555 Mm; Depth: 1855 Mm; Width: 1515 Mm. Weight: 50, 20 Kg. The Bidding Company Must Present Along With The Proposal Certificates And Reports In The Name Of The Manufacturer, That The Material Used In The Manufacture Of The Devices Meets The Following Nbrs: Abnt - Nbr – 16.779/2019 - Permanent Equipment Installed For Outdoor Training Free Access. Safety Requirements And Test Methods. Nbr 7399:2015 – Hot Dip Galvanized Steel And Cast Iron Product – Verification Of Coating Thickness Using A Non-Destructive Process – Test Method. Nbr 11003:2009 - According To Errata 1, Published On 04/27/2010 – Tests That Determine Paint Adhesion. Nbr 15454:2007 – Testing The Properties And Structure Of Metals And Their Iron Alloys, - Metallography Of Iron Alloys – Carbon. Nbr 10443:2008 – Test That Determines The Thickness Of The Dry Film On Rough Surfaces. Nbr 9209:1986 - Test That Determines The Mass Of The Phosphate Coating. (Standard Values: Phosphate Layer Mass Between 1.0G/M² And 1.6G/M²), Dual Walking Simulator: For Two Simultaneous Users Walking Simulator. Increases The Mobility Of The Lower Limbs And Develops Motor Coordination. Manufactured With Carbon Steel Tubes Measuring At Least 2 ½ X 2 Mm; 2” 1 ½ X 2 Mm; Drawn Carbon Steel Tube 2” X 5.54 Mm Schedule 80 (60.3 X 49.22 Mm); Carbon Steel Plates Of At Least 3 Mm; Steppers Made Of Stamped Carbon Steel Sheet Of At Least 2 Mm, With Rounded Corners, Stamped 2 Mm Carbon Steel Covers To Protect The Bearings. It Uses Solid Axles, With Double Bearings, Electrostatic Polyester Powder Painting, Manufacturer Data And Contact For Technical Assistance. Height: 1150 Mm; Depth: 1750 Mm; Width: 1055 Mm. Weight: 58 Kg. The Bidding Company Must Present Certificates And Reports Along With The Proposal In The Name Of The Manufacturer, - Metallography Of Iron – Carbon Alloys. Nbr 10443:2008 – Test That Determines The Thickness Of The Dry Film On Rough Surfaces. Nbr 9209:1986 - Test That Determines The Mass Of The Phosphate Coating (Standard Values: Mass Of The Phosphate Layer Between 1, Double Mechanical Elliptical: For Two Users Elliptical Exercise. Improves Flexibility Of Lower And Upper Limbs, Hips And Cardiorespiratory Function . Manufactured With Carbon Steel Tubes Of At Least 2 ½ X 2 Mm; Mm Schedule 40 (42.3 X 35.18 Mm); Metal Of At Least 30 X 50 X 2 Mm; Carbon Steel Plates Of At Least 9.53; 4.75Mm; 3Mm; Steppers Made Of Stamped Carbon Steel Sheet Of At Least 2 Mm, Rubber Stops, External Metal Covers, Mig Welding, Rubberized Finish. Allows The Use Of 2 (Two) Users
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.