1. The Subject Of The Order Is The Purchase Of A Roadside Cutter For The Needs Of The District Roads Authority In Janów Lubelski.2. The Order Includes The Purchase Of A Roadside Cutter, Its Delivery To The Zdp Base In Janów Lubelski, Installation To The Ordering Partys Agricultural Tractor And Training Of Two Employees In Janów Lubelski In The Operation And Maintenance Of The Delivered Machine.3. Description Of The Machine. The Delivered Roadside Cutter Should Be A Device Adapted To Be Mounted On The Rear Three-Point Linkage Of An Agricultural Tractor. Roadside Cutting Should Be Done Using A Blade And A Cutting Wheel Or A Screw Cutter With Replaceable Knives And A Profiling Disc, Then The Cut Material Should Be Fed Onto A Conveyor Belt Transporting The Cut Material To A Trailer Driving In Front Of The Cutter. The Throwing Distance Should Be Adjustable (E.G. Limit Flap, Belt Speed, Etc.). The Device Should Be Controlled From The Tractor Cabin Using Power Hydraulics And Pto, In Particular Control Of The Speed Of The Screw Milling Cutter, The Rotor Loading The Excavated Material Onto The Belt, The Profiling Disc, The Belt Conveyor, And The Adjustment Of The Milling Width And Depth. The Hydraulic System Of The Device Should Have Protection In The Event Of Encountering An Obstacle Or Being Blocked By A Large Element, E.G. A Stone, Etc. The Cutter Should Be Equipped With A Cylindrical Brush Sweeping The Road Surface Behind The Set. 4.4. Characteristic Quality Parameters Of The Supplied Roadside Shearer Are Determined: - Maximum Cutting Width - Minimum 0.5 M (Hydraulically Adjusted) - Cutting Depth - Hydraulically Adjusted - Shoulder Slope - Hydraulically Adjusted - Working Speed - Minimum 200 M/H - Efficiency - Minimum 100 M3 /H - Cutting Tool - Blade + Cutting Wheel Or Screw Cutter With Replaceable Knives + Profiling Plate - Drive Of The Cutters Components - Hydraulically From The Tractors Own Independent Hydraulic System Driven By The Tractors Pto - Transport Of The Excavated Material - Via A Conveyor Belt To The Load Box In Front Of The Tractor - Control Of The Cutters Operation - With Control Panel Mounted In The Tractor Cabin - Additional Equipment - Cylindrical Brush Ø600 ÷ Ø800 Mm, Working Width 200 Cm ÷ 250 Cm Mounted Behind The Cutter A Detailed Description Of The Subject Of The Order Is Specified In Annex No. 1 To Swz.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.