Magnets – Cryring Superconducting Solenoid. -A Superconducting Solenoid With The Geometry Specified In The Specification, Capable Of Generating A Magnetic Flux Density Of Up To 5T At Its Center, And With A Warm Bore Large Enough To Accommodate The Existing Electron Beam Line. -A Cryostat With A Closed Cooling System Capable Of Cooling The Solenoid And Maintaining It At Operating Temperature For Extended Periods Of Time As Specified. - A Warm Iron Feedback Yoke Surrounding The Solenoid And Cryostat And Having The Specified Geometry. - Any Auxiliary Systems Such As Cryocompressors Or Vacuum Pumps Required For The Operation Of The Cryostat. - A Power Supply And A Suitable Connection System Capable Of Magnetizing The Solenoid Coil To A Flux Density Of Up To 5 T, Including Subsystems For Quench Protection And Detection. - A Calibration Curve Of The Magnetic Flux Measured At The Center Of The Magnet Versus The Electrical Coil Current Measured At The Power Supply Coil Current Measured At The Power Source. - Test And Measurement Records Proving That The Scms Meets All Detailed Specifications. - 3D Cad Files Of The Geometrically Critical Components As Specified. - Manuals And Data Sheets Of All Associated Subsystems Such As Cooling Heads, Cryocompressors, Vacuum Pumps And Power Supplies.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
