Safety Helmet Safety Helmet, Made Of Polyethylene, With Front Flap, V-Shaped Ribs, Semi-Circular Rail, With Two Side Slits, For Slots, With Polyester Suspension, With Four Attachment Points, With Chamfer, Double Damping Suspension It Consists Of A Crown With Double Suspension, Adjusted With Straps And Nylon String And An Adjustable Strap On The Back And Rear Ratchet Adjustment, With Chin Straps And Sweat-Absorbing Straps. Class B. In White Color. It Must Have Silk Screen Engraving With The Official Coat Of Arms Of The Municipality On The Front Of The Hull. You Must Have A Valid Approval Certificate Issued By The Ministry Of Labor And Employment. The Ca Approval Certificate And Technical Catalog Must Be Delivered Together With The Commercial Proposal., Safety Helmet - Safety Helmet, With Sweat Absorption Strips. Class B. In Blue Color. It Must Have Silk Screen Engraving With The Official Coat Of Arms Of The Municipality On The Front Of The Hull. You Must Have A Valid Approval Certificate Issued By The Ministry Of Labor And Employment. The Ca Approval Certificate And Technical Catalog Must Be Delivered Together With The Commercial Proposal., Complete Safety Helmet - Safety Helmet, With Sweat Absorption Strips. Class B. In Orange Color. It Must Have Silk Screen Engraving With The Official Coat Of Arms Of The Municipality On The Front Of The Hull. - Face Shield To Attach To The Helmet, Perforated, Made Of Steel With Black Epoxy Painting, At Least 200 Mm High And 430 Mm Wide. With Black High Density Polyethylene Support With Chin Strap. Must Meet Standard - Ansi/Isea Z87.1. Exempt From Ca. Full Description As Per Public Notice, Welding Mask - Safety Mask For Welding Works, Composed Of A Shield Made Of Polypropylene, With A Headband Made Of Plastic Material, With Size Adjustment Using A Ratchet. The Mask Must Have An Articulated Visor That Must Be Secured Using Metal Pins. The Articulated Display Must Have A 1.0 Mm Thick Colorless Plastic Cover Plate On The Outside. You Must Have A Valid Approval Certificate Issued By The Ministry Of Labor And Employment. You Must Deliver, Together With The Commercial Proposal, The Ca Approval Certificate And Technical Catalog., Facial Protector With Ratchet - Facial Protector Made Of Colorless Polycarbonate And With Support In Black Plastic Material. It Must Have Protection Such As Flaps On The Sides, 20 Mm Wide And 8 Mm High. Between The Support And The Protector, There Must Be Three Plastic Cylindrical Pins And Four Rectangular Pins. The Chamois Must Be Adjusted Using A Ratchet, As Well As The Chamois Must Have Foam In The Forehead Region To Absorb Sweat. You Must Have A Valid Approval Certificate Issued By The Ministry Of Labor And Employment. You Must Deliver, Together With The Commercial Proposal, The Certificate Of Approval And Technical Catalog. Nasal Support Injected From The Same Material. The Spatula-Type Temples, Made From The Same Material As The Display, Have Five Slits And Malleable Black Rubber In The Central Part Of The Tip Of The Temples. The Rods Are Fixed To The Ends Of The Display Using Metal Screws. In Smoke Color. Must Have A Valid Approval Certificate And
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.